| Marathon Screen The original screen dimensions were enlarged in all directions to create a screen with wind protection properties fitting a long range tourer such as the new RT. The extended sides reduce the wind pressure on the arms and upper body, and the height and shape of the top of the screen provide an even, turbulence free protection for the rider’s head. Taller riders find good protection from this screen even at high speeds. The dreaded suction effect that is often present with large touring screens is kept to a comfortable minimum; The built in screen adjustment of the 1200 RT means that every rider can find the best set-up for his/her height and preference. The qualities of this screen are best felt after a long day’s riding, and the neck muscles will especially feel the positive effect. Made of 5 mm thick scratch resistant, durable material. Fitting is simple, just replace using the original mounting points. TÜV approved. |
A shorter and slightly wider screen for the RT (480 mm high and 620 mm wide).
This screen operates on the principle of “less is more”.
The “Short” offers good wind protection despite its lower height and is suited to the rider who likes some protection - but
still likes to feel the wind in his/her face (in warm climates the extra cooling of the upper body is an advantage).
The built-in screen adjustment function of the 1200 RT allows any rider to find a good setup for any or weather condition.
Made of 5 mm thick scratch resistant, durable material with smooth, rounded edges. Fitting is simple, just replace using
the original mounting points.
Leg Protector
The leg protector starts from the underside of the top fairing and follows the lower fairing edge all the way down in front of the rider’s feet. It’s complex 3D shape and additional soft rubber seal along the whole inner edge ensures a good
seal between protector and fairing for maximum protection effect.
The significant reduction in wind and water that
now reach the rider’s leg and feet dramatically improve the quality of ride. If caught out on a long wet touring ride, the protectors could be the difference between wet misery and riding joy.
Easy to fit, and sold as a set of left and right side complete with metal brackets and bolt set. No modification to fairing or bike is needed, and they can be fitted with or without our engine protection bars.
Complete set (left + right side)
This small screen is fitted next to the wind screen to deflect the onrushing wind and rain over the riders hands.
Combined with the windscreen, they reduce the load on the riders arms and upper body.
The deflectors are easy to fit, and are supplied as a set of left and right side complete with metal brackets and full fitting kit.
Can be used with original or Wunderlich screens.
No modification to bike needed.
Complete set (left + right side)
This is a simple but effective cruise control solution.
On long riding stints the throttle hand can become tired and cramped. Cruise Control reduces this problem.
The device replaces the right hand side end weight, and a simple turn of the adjustment wheel causes the Cruise control to apply
pressure onto the twist grip.
The adjustment wheel has wide spaced teeth that allow easy turning even while wearing a glove, so it can be dialled in for exactly the required pressure. To disable, the adjustment wheel is simply turned the other direction, and. in a matter of seconds the twist grip
returns to normal function.
Not many companies know how to turn a lump of metal into a motorcycle part that is a work of art like RIZOMA does.
Not only do these levers add visual value to the bike, they also fit perfectly to the hand.
The levers can be fitted using either the original adjustment wheels or the RIZOMA-made
ones. You have the option of putting together a set of levers exactly to your liking.
Machined from high quality Billet-aluminium and then either anodised or polished to a high gloss
finish.
Easy to fit.
Adjustment button set for Rizoma Lever set.
NB Not essential - you can re use the BMW items!
It‘s important to be able to find the rear brake pedal when you need it!
The original brake lever tip is a bit too small, the enlarger substantially increases the size of the rather small original brake pedal and provides a greater margin of safety and level of comfort.
About 15 mm longer and 6 mm wider than original, it’s simply pushed on and secured with a small set screw.
The cut serrations provide excellent grip, especially important on wet days.
Anodised silver.
Once you fit it, you won’t go back...
A 1200 RT parked on soft ground or hot tarmac is a recipe for disaster, especially if fully loaded with luggage. Fitting
this reduces the danger.
The precision machined plate is made of 8 mm thick aluminium alloy, the contours of the side stand are matched for a good fit. The surface area is increased by 100% compared to the original side stand.
A small grippy serrated area on the side helps deploying the side stand with the boot.
Anodised black, comes with all bolts and a vibration-damping pad.
Easy to fit.
Tip: Before fitting the enlarger, paint the underside of your original side stand with black paint to prevent further rusting of the blank +
scuffed metal.
These self adhesive pads protect the top yoke from key damage and greatly enhance the appearance of the yoke.
Even previously scratched yokes can be made look nice again by covering up the damage with one of these precision cut
pads.
Scratch- and weather-resistant and offers top protection to the yoke.
Easy to fit, simply peel back the protective foil and attach to the yoke.
These self adhesive pads protect the top yoke from key damage and greatly enhance the appearance of the yoke.
Even previously scratched yokes can be made look nice again by covering up the damage with one of these precision cut
pads.
Scratch- and weather-resistant and offers top protection to the yoke.
Easy to fit, simply peel back the protective foil and attach to the yoke.
CNC machined from billet aluminium these adaptors could be the solution to leg cramps and an uncomfortable riding position.
Easy to fit and supplied with all required hardware.












